Aluminum alloy square downpipe is durable and easy to install
Downpipe for villa
Downpipe for villa. Villa downpipe system is very common in construction. We must pay good attention to the size when selecting materials. It is good to note that the sizes of seamless downpipes are: inches, inches, rectangular pipes, inches, round pipes. The size of downspouts is determined by those factors. Rainwater pipes are an integral part of the villa roof drainage system. Their function is to drain the rainwater collected in the roof gutter in an organized manner. building.
The materials include: colored aluminum seamless rainwater pipes, downspouts, copper rainwater pipes, etc. Seamless colored aluminum rainwater pipes are widely used in the market because of their good quality, cost-effectiveness, beautiful appearance and durability. Seamless rain pipes come in international standard sizes: inch-inch rectangular rain pipe inch-inch round rain pipe. Usually, an inch water pipe can satisfy a square foot (square meter) of roof. An inch water pipe can satisfy a square foot (square meter) of roof. The drainage capacity of an inch round pipe is equivalent to that of an inch. The drainage capacity of a square pipe is equivalent to an inch. Square pipes have a displacement equivalent to inches.
Installation of round pipes:
, mark the downpipe position spacing according to the drawing. - Set fixed brackets in meters.
After measuring the length of the pipe, it can be cut with a hacksaw, manual cutting saw, or grinding wheel cutting machine. saw. After cutting and sawing, the section should be kept flat. Use a steel file to remove burrs and chamfer
. Use a dry cloth with detergent to clean the outer wall of the pipe and the inner wall of the pipe fittings to remove contaminants
. Apply the solvent evenly to the outer wall of the pipe and the inner wall of the pipe. Then quickly insert the pipe into the inner wall of the pipe and rotate it hard for at least 1 turn to ensure that the joint is tight and leak-free
. After the bonding is completed, wipe off the excess solvent and fix the pipe in place for a period of time without being affected by external forces
br/> After the pipe fittings are completely bonded, place them in the set bracket and tighten the bracket fixings to complete the installation.
Square pipe installation:
After measuring the length of the pipe, use a manual cutting saw or a grinding wheel cutting machine to cut the pipe. The cross section should be kept flat after cutting
. Insert the pipe into the pipe fittings and use rivets to fix the joints with silicone to ensure a seamless joint.
Place the pipe at the position marked on the drawing and secure the pipe fittings with stainless steel screws and expansion tubes. Fix it and the installation is complete.
Aluminum alloy square downpipe is durable and easy to install